Universally applicable - the NETZSCH TORNADO Mobile

Universally applicable - the NETZSCH TORNADO® Mobile

Rotary lobe pump on wheels for universal use at the most unusual of locations

The TORNADO® Mobile combines the flexibility and independence of a mobile unit with the proven technology of a TORNADO® T1 rotary lobe pump from NETZSCH. Mobility through mounting on a car or truck trailer enables the pumping of large quantities of fluids with high solid content, wastewater and slurry at the most diverse and unusual locations. Depending on the application, the TORNADO® rotary lobe pump is mounted on a trailer with diesel unit in the appropriate size.

At the core of the mobile units are the TORNADO® pumps with two rotary lobes which are three-winged and screw-shaped and engage whilst rotating. They thereby generate a vacuum on the suction side. This means the water is drawn in automatically andconveyed to the discharge side. Viscosity and dry matter content have a minimal effect on the volumetric flow. Solids like sand or clumps of earth pose absolutely no problems for the robust pumps. Robust design ensures reliable operation. When designing the pumps, special attention was paid to robustness to ensure that abrasive or aggressive media would be unable to damage the technology. The rotary lobes are coated with resistant nitrile rubber, which enables the pump seal to do its job reliably even under great stress and strain. Furthermore, the gear box and pump chambers in the pumps are separated from one another. Even in the event of the shaft sealing failing, the media being conveyed will not be able to get into the gear box and damage it. The pumping capacity, drive (diesel unit) and chassis are designed precisely to the features of the pumping medium and purpose. Highly diverse material and shaft seal variants cover virtually all applications in the areas of farming, environmental and catastrophe protection, chemical, paper as well as oil and gas. The TORNADO® rotary lobe pump is designed for easy handling and maintenance. In this way, any maintenance can be performed directly on site. In order to clean or replace seals or rotary lobes, for example, only the housing cover has to be removed. This ensures that the pump is quickly ready for use again.

Get a personalized offer now!

TORNADO T1 Rotary Lobe Pump with labelling

1 Front Cover
Rotors, cover seal and product seals can be accessed for inspection, service or replacement by simply removing the front cover. Disassembly of the inlet and outlet pipework and pump housing is not necessary.

2 Wear Plates
Abrasion and chemically resistant, replaceable wear plates are fitted both sides of the rotors.

3 Rotors
Straight sided or helical rotors are selected to suit individual application requirements. Rotors are available as bi-lobe, tri-lobe or four-lobe and a wide range of materials is available. The rotor geometry and material are selected for the characteristics of the pumped media. Geometries are available for products which are viscous, abrasive or contain solids. Materials tailored to the media characteristics increase the durability of the rotors and extend service life.

4 Housing Crescents
Modular construction allows for the crescents to be simply replaced should wear occur. Pump life time can be further extended with the option of replaceable crescent liners.

5 Seals
Wide range of product seals and materials are available, which are selected to suit individual application requirements. Seal arrangements include easy access connections for seal quench or flush.

6 Gearbox
The patented gearbox design includes NETZSCH GSS-Technology separating the pump head from the gear box which eliminates cross contamination between the pump media and gear box lubricant.

Size*

Pressure max.

(bar)

Capacity min.

(m³/h)

Capacity max.

(m³/h)

Speed

(rpm)

MB-1 8 3 23 800
MB-2 8 4 32  800
XLB-2 6 30 166 550
XLB-3 6 43 235 550
XLB-4 6 60 332 550
XLB-6/2 5 121 604 500
XLB-8/2 5 181 905 500

*Further sizes and technical data on request.

  • Flexible use in the most unusual places through mounting on trailers
  • Extended operational reliability
  • No ingress of the pumped media into the pump gearbox in the event of a product leaking
  • No ingress of pump gearbox oil into the pump chamber
  • Lubrication/cooling of the seal through easily accessible flushing/sealing water connections
  • Maximum operational reliability
  • High pumping speed up to eight mWS
  • Insensitive to dry running
  • Independent of direction of rotation
  • Low life cycle costs
  • Easy operation due to electronic motor control management

You may also be interested in:

TORNADO® T.Envi® Rotary Lobe Pump

The TORNADO® T.Envi® rotary lobe pumps in FSIP® design are optimally adapted to your requirements in environmental and biogas technology and impress with easy maintenance.

M-Ovas® Universal Cutting Plate Macerator

With the universally applicable M-Ovas® cutting place macerator, you can prevent possible damage to your pump caused by impurities.

TORNADO® T1 Rotary Lobe Pump

The TORNADO® T1 rotary lobe pump with its proven quality is a positive displacement pump. The pumping action is generated by the contra-rotation of two rotors within the pump chamber which are synchronised externally. The media enters the pump chamber through the inlet port and is carried around the chamber by the rotors to the outlet port where it is discharged.

N.Mac® Channel Twin Shaft Grinder

The N.Mac® channel twin shaft grinder crushes fragmenting large and solid particles in liquid media and impresses with its innovative FSIP® concept (Full Service in Place).